Configuration Guide; Configuring Ht-496 Through Voice Prompt; Dhcp Mode; Static Ip Mode - Grandstream Networks HT-496 User Manual

Dual fxs port analog telephone adaptor
Hide thumbs Also See for HT-496:
Table of Contents

Advertisement

Configuration Guide

C
HT–496
ONFIGURING
DHCP M
ODE
Select voice menu option 01 to enable HT–496 to use DHCP.
STATIC IP M
ODE
Select voice menu option 01 to enable HT–496 to use STATIC IP mode, then use option 02, 03, 04, 05 to
set up IP address, Subnet Mask, Gateway and DNS server respectively.
F
S
IP A
IRMWARE
ERVER
Select voice menu option 13 to configure the IP address of the firmware server.
C
S
ONFIGURATION
ERVER
Select voice menu option 14 to configure the IP address of the configuration server.
U
P
PGRADE
ROTOCOL
Select voice menu option 15 to choose firmware and configuration upgrade protocol. User can choose
between TFTP and HTTP.
F
U
M
IRMWARE
PGRADE
Select voice menu option 17 to choose firmware upgrade mode among the following three options:
1) always check, 2) check when pre/suffix changes, and 3) never upgrade
WAN P
W
A
ORT
EB
CCESS
Select voice menu option 12 to enable WAN Port Wed Access of the device configuration pages.
C
HT–496
ONFIGURING
HT–496 has an embedded Web server that will respond to HTTP GET/POST requests. It also has
embedded HTML pages that allow users to configure the HT–496 through a Web browser such as
Microsoft's IE and AOL's Netscape.
A
W
C
CCESS THE
EB
The HT–496 HTML configuration menu can be accessed via LAN or WAN port:
F
LAN
:
ROM THE
PORT
1. Directly connect a computer to the LAN port.
2. Open a command window on the computer
3. Type in "ipconfig /release", the IP address etc. becomes 0.
4. Type in "ipconfig /renew", the computer gets an IP address in 192.168.2.x segment by default
5. Open a web browser, type in the default gateway IP address. http://192.168.2.1. You will see the
login page of the device.
Grandstream Networks, Inc.
VoIPon
www.voipon.co.uk
V
P
THROUGH
OICE
ROMPT
DDRESS
IP A
DDRESS
ODE
W
B
WITH
EB
ROWSER
M
ONFIGURATION
ENU
HT–496 User Manual
Firmware 1.0.3.64
sales@voipon.co.uk
Tel: +44 (0)1245 808195
Page 15 of 33
Last Updated: 1/2007
Fax: +44 (0)1245 600030

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the HT-496 and is the answer not in the manual?

Subscribe to Our Youtube Channel

Table of Contents

Save PDF