Configuring Device Ports - Lantronix SCSxx05 User Manual

SCSxx05/SCSxx20 User Guide
7. To enter the list of TCP Public Services that the SCS should support, edit the
text-entry list from the choices indicated in the Answer field (ftp-data, ftp,
SSH, telnet, www, and https).
8. Press the Esc key to end the editing, and press Enter. The UDP public
services prompt displays
9. To identify the UDP public services to be supported, enter the services
required for your configuration in the Answer field.
10. Press the Esc key to end text entry, and press Enter to continue. The setup
menu returns with Configure Device Ports selected.

Configuring Device Ports

Note:
terminal port, other than its data rate. Therefore, no options are available
on the setup menu or Web interface for changing its configuration. If you
need to make a change, use the dtedce command to change the DTE or
DCE setting, and use the buttons on the front panel to change the baud
rate (see
The Configure Device Ports option on the setup menu is actually a script
running within the setup script. Therefore, some of its processes are different
from those of other options. Done in the Configure Device Ports routine
causes your changes to be written to the flash memory. This is different from
Done at the end of the setup menu list, which just prepares the entries to be
saved. Also, <Back> navigation is disabled in some places.
Firewall.conf
What is the value for TCP_PUBLIC_SERVICES?
This is the list of ports we allow TCP connections to.
Answer: ssh telnet https
For example, you may choose to remove telnet from this list of services
for security reasons, leaving only ssh and https .
What is the value for TCP_PUBLIC_SERVICES?
This is the list of ports we allow TCP connections to.
Answer: ssh https
What is the value for UDP_PUBLIC_SERVICES?
This is the list of ports we allow UDP connections to.
Answer: ntp
It is generally not necessary to change the configuration of the
Method #1 – Using the Front Panel Display).
4-5
4: Configuration