Browsing For And Navigating A Saved Route; Browsing For And Navigating Parallel To A Saved Route - Garmin GPSMAP 6008 Owner's Manual

Gpsmap 6000/7000 series chartplotter
Hide thumbs Also See for GPSMAP 6008:
Table of Contents

Advertisement

Where To?
1. From the Home screen, select
2. Select a waypoint.
Navigate
to.
3. Select
4. Complete an action:
Go
to.
• Select
• Select
Route
to.
• Select
Guide to
5. Review the course indicated by the magenta line.
Note: When using Auto Guidance, a gray line within any part of the magenta line indicates that Auto
Guidance cannot calculate part of the Auto Guidance line due to the minimum safe water depth and the
minimum safe obstacle height settings
6. Follow the magenta line, steering to avoid land, shallow water, and other obstacles.

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route
(page
37).
1. From the Home screen, select
2. Select a route.
Navigate
to.
3. Select
4. Complete an action:
Forward
• Select
Backward
• Select
A magenta line appears. In the center of the magenta line is a thinner purple line that represents the
corrected course from your current location to the destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
5. Review the course indicated by the magenta line.
6. Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other
obstacles.
Note: If you are off course, follow the purple line (corrected course) to go to your destination, or steer
back to the magenta line (direct course).

Browsing for and Navigating Parallel to a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route
(page
37).
1. From the Home screen, select
2. Select a route.
Review
Navigate
3. Select
>
4. Select
offset
to navigate parallel to the route, offset from it by a specific distance.
44
Where to?
> Waypoints.
to use Auto Guidance.
(page
Where to?
> Routes.
to navigate the route from the starting point used when the route was created.
to navigate the route from the destination point used when the route was created.
Where to?
> Routes.
to.
59).
GPSMAP
6000/7000 Series Owner's Manual
®

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents