Individual Routine Calls - Garmin GPSMAP 6008 Owner's Manual

Showing and Setting the Duration of Trails for All Tracked Vessels
Note: The Fishing chart and Mariner's Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select Charts.
2. Select Navigation Chart,
3. Select Menu > other Vessels
4. Select the number of hours to show tracked vessels on the chart or 3D chart view.
For example, if you select 4 Hours, all trail points that are less than four hours old appear for all tracked
vessels.
Showing the Trail Line for a Tracked Vessel
You can show the trail line for a specific tracked vessel.
Note: The Fishing chart and Mariner's Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select Charts.
Navigation Chart,
2. Select
Menu other Vessels
3. Select >
4. Select a vessel.
5. Select Review > edit
Changing the Appearance of a Trail Line
You can change the appearance of a trail line for a specific tracked vessel.
Note: The Fishing chart and Mariner's Eye 3D are available with a preprogrammed BlueChart g2 Vision
data card.
1. From the Home screen, select Charts.
2. Select Navigation Chart,
3. Select Menu > other Vessels
4. Select a vessel.
Review edit
5. Select >
6. Select a color for the trail line.

Individual Routine Calls

When you connect your Garmin chartplotter to a Garmin VHF NMEA 2000-compatible radio, you can use
the chartplotter interface to set up an individual routine call. When setting up an individual routine call from
your chartplotter, you can select the DSC channel on which you want to communicate
transmits this request with your call.
GPSMAP 6000/7000 Series Owner's Manual
®
Fishing Chart, Perspective
> DSC > DSC trails.
Fishing Chart, Perspective
DSC DSC List.
> >
> trail > Show.
Fishing Chart, Perspective
> DSC > DSC List.
trail Line.
>
3D, or Mariner's eye 3D.
3D, or Mariner's eye 3D.
3D, or Mariner's eye 3D.
Digital Selective Calling
(page 114). The radio
113