Browsing For And Navigating A Saved Route; Browsing For And Navigating Parallel To A Saved Route; Deleting A Saved Route; Deleting All Saved Routes - Garmin ECHOMAP UHD2 Owner's Manual

Browsing for and Navigating a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route.
1 Select Nav Info > Routes.
2 Select a route.
3 Select Navigate To.
4 Select an option:
• To navigate the route from the starting point used when the route was created, select Forward.
• To navigate the route from the destination point used when the route was created, select Backward.
A magenta line appears. In the center of the magenta line is a thinner purple line that represents the
corrected course from your present location to the destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
5 Review the course indicated by the magenta line.
6 Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other
obstacles.
7 If you are off course, follow the purple line (corrected course) to go to your destination, or steer back to the
magenta line (direct course).

Browsing for and Navigating Parallel to a Saved Route

Before you can browse a list of routes and navigate to one of them, you must create and save at least one route.
1 Select Nav Info > Routes.
2 Select a route.
3 Select Navigate To.
4 Select Offset to navigate parallel to the route, offset from it by a specific distance.
5 Indicate how to navigate the route:
• To navigate the route from the starting point used when the route was created, to the left of the original
route, select Forward - Port.
• To navigate the route from the starting point used when the route was created, to the right of the original
route, select Forward - Starboard.
• To navigate the route from the destination point used when the route was created, to the left of the
original route, select Backward - Port.
• To navigate the route from the destination point used when the route was created, to the right of the
original route, select Backward - Starboard.
6 If necessary, select Done.
A magenta line appears. In the center of the magenta line is a thinner purple line that represents the
corrected course from your present location to the destination. The corrected course is dynamic, and it
moves with your boat when you are off course.
7 Review the course indicated by the magenta line.
8 Follow the magenta line along each leg in the route, steering to avoid land, shallow water, and other
obstacles.
9 If you are off course, follow the purple line (corrected course) to go to your destination, or steer back to the
magenta line (direct course).

Deleting a Saved Route

1 Select Nav Info > Routes.
2 Select a route.
3 Select Review > Delete.

Deleting All Saved Routes

Select Nav Info > Manage Data > Clear User Data > Routes.
Navigation with a Chartplotter 37