Inserting And Removing Data And Memory; Cards; Viewing System Information - Garmin GPSMAP 6008 Owner's Manual

Getting Started
Inserting and Removing Data and Memory Cards
Your chartplotter supports SD cards. Insert optional BlueChart g2 Vision data cards to view high-resolution
® ®
satellite imagery and aerial reference photos of ports, harbors, marinas, and other points of interest. Insert
blank memory cards to transfer data such as waypoints, routes, and tracks to another compatible Garmin
chartplotter or a computer (page 69). The SD card slot is located on the front of the chartplotter.
• Open the access door, insert the data card or the memory card into the slot, and press the card until it clicks.
• Press the data card or the memory card into the slot again and release it to eject the card.
Card label
Card label
Vertical SD Card Slot
Horizontal SD Card Slot

Viewing System Information

You can view the software version, the basemap version, any supplemental map information (if applicable),
and the unit ID number. You may need this information to update the system software or to purchase additional
map data information.
Configure System System Information.
From the Home screen, select > >
4 GPSMAP 6000/7000 Series Owner's Manual
®