Restoring The Original Chartplotter Factory Settings; Communication With Wireless Devices - Garmin GPSMAP 6008 Owner's Manual

Viewing the Event Log
The event log shows a list of system events.
From the Home screen, select
Saving System Information to a Memory Card
You can save system information to a memory card as a troubleshooting tool. A Garmin Product Support
representative may ask you to use this information to retrieve data about the marine network.
1. Insert a memory card into the SD card slot on the chartplotter.
2. Select Configure > System
3. Remove the memory card.

Restoring the Original Chartplotter Factory Settings

Note: This procedure deletes all settings information you have entered.
1. From the Home screen, select
2. Select Yes.

Communication with Wireless Devices

Connecting a Wireless Device
You can allow wireless devices, such as a remote control or an optical mouse, to communicate with the
chartplotter.
From the Home screen, select
Yes.
Disconnecting a Wireless Device
1. From the Home screen, select
2. Select a wireless device.
3. Select Disconnect.
Garmin Marine Network
The Garmin Marine Network allows you to share data from Garmin peripheral devices with Garmin
chartplotters quickly and easily. You can connect a GPSMAP 6000/7000 series chartplotter to a Garmin
Marine Network to receive data from and share data with other Marine Network-compatible devices and
chartplotters.
Transferring Data over the Garmin Marine Network
See "Chartplotter Data Management"
Configuring Networked Devices
See "Networked Device Configuration"
GPSMAP 6000/7000 Series Owner's Manual
®
Configure System
> >
> System Information
Configure > System >
Configure > Communications
Configure > Communications
(page 69).
(page 71).
System Information
>
> Garmin Devices > Save to
System Information >
> Wireless Devices
> Wireless Devices.
Appendix
event Log.
Card.
Factory Settings > Reset.
> New Connections >
119