Garmin GPSMAP 6008 Owner's Manual page 96

Gpsmap 6000/7000 series chartplotter
Hide thumbs Also See for GPSMAP 6008:
Table of Contents

Advertisement

Radar
Adjusting Rain Clutter on the Radar Screen
You can adjust the appearance of clutter caused by rain. Reducing the radar range also can minimize rain
clutter
(page
72).
Setting
Description
FTC
This setting effects the appearance of large, hazy masses of clutter caused by rain at any
distance�
Rain Clutter
This setting effects the appearance of nearby rain clutter and targets more than it effects
the appearance of distant rain clutter and targets� A higher rain clutter setting reduces
the appearance of clutter caused by nearby rain, but it can also reduce or eliminate the
appearance of nearby targets�
Note: Depending upon the radar in use, the rain clutter and FTC settings configured for use in one radar
mode may or may not be applied to other radar modes or to the Radar Overlay
1. From the Home screen, select Radar.
2. Select Cruising, Harbor, offshore,
3. Complete an action:
Menu
Noise Rejection
• Select
>
• Configure the setting for both screens in Dual Range mode. Select
>
FtC
for the GPSMAP 6000 series. Select
series.
4. Complete an action:
• Select High, Medium, or
non-xHD radar. Other targets should remain clearly visible on the Radar screen.
• Select
Up
or
Down
Other targets should remain clearly visible on the Radar screen. If the FTC setting is greater than 50%,
consider reducing the radar range.
5. Complete an action:
• Select
Menu
>
Noise Rejection
• Configure the setting for the short-range screen in Dual Range mode. Select
Rejection
Rain Clutter
>
for the GPSMAP 7000 series.
• Configure the setting for the long-range screen in Dual Range mode. Select
Rejection
>
Rain Clutter
Clutter
for the GPSMAP 7000 series.
6. Select
Up
or
Down
to decrease or increase the appearance of nearby rain clutter until other targets are
clearly visible on the Radar screen.
Clutter caused by rain may still be visible.
90
Dual
Range, or
FtC
>
for Cruising, Harbor, Offshore, or Sentry mode.
Low
to decrease or increase the appearance of rain clutter, if using a GMR
to decrease or increase the appearance of rain clutter, if using a GMR xHD radar.
>
Rain Clutter
for the GPSMAP 6000 series. Select
for the GPSMAP 6000 series. Select
Sentry
mode.
Left
>
Noise Rejection
for Cruising, Harbor, Offshore, or Sentry mode.
Left
Right
GPSMAP
(page
85).
Menu
Noise Rejection
>
>
>
FtC
for the GPSMAP 7000
>
Menu
>
Noise Rejection
Rain Clutter
>
>
Menu
Noise
>
>
>
Noise Rejection
>
Rain
6000/7000 Series Owner's Manual
®
Noise

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents