Table of Contents
Advertisement
TARGUS Noteworthy DVD-ROM
C
HAPTER
Depending on your mode of operation for the drive you can
install this DVD using standard Windows drivers or install the
included TARGUS High Speed drivers for Windows 95/98/ME/
2000/XP. We recommend installing the performance drivers
for playing DVD Movies and other DVD Video applications.
Skip to the Performance Driver Installation section to continue.
3.1 Driver installation under Windows 95
No special software is required to install your TARGUS PC Card
Cable. We however recommend using the driver on diskette
that we have enclosed. This has been specially developed and
is faster than the Standard Windows driver.
TARGUS High Speed driver (recommended)
Note: If you are not prompted to install the driver, Windows
will install the default driver automatically. Proceed then as
described in the section on later installation of the TARGUS
High Speed driver.
To install the driver, insert the TARGUS installation diskette in
your PC drive.
1. Plug the TARGUS PC Card Cable into the PCMCIA slot of
your PC.
2. The window "Update Device Driver Wizard" opens. The
TARGUS PC Card Cable is recognized as "Standard IDE/ESDI
Hard Disk Controller".
Confirm with "Next" to continue the installation.
3. The driver is found in the next window. Confirm with
"Finish".
4. The driver is installed from the disk.
5. After restart your TARGUS drive appears under „My Com-
puter" with a new drive letter.
Uninstalling the TARGUS High Speed driver
To uninstall the TARGUS High Speed driver, select the file
"DriverRemove.exe" on the installation diskette and follow
the on-screen instructions.
8
3:
Driver installation
Advertisement
Table of Contents
