Under Windows 2000 / Windows Xp - Targus Noteworthy Instructions Manual

TARGUS Noteworthy DVD-ROM
5. Under "Reserved Drive Letter" enter a drive letter, for
example "F" for the TARGUS Noteworthy device as the
"First drive letter" and "F" again as the "Last drive letter".
6. Confirm your selection with "OK". When you restart your
computer, the TARGUS Noteworthy drive will be assigned
the letter "F" in "My Computer".
3.4 Driver installation under Windows 2000 / XP
No special software is required to install your TARGUS PC Card
Cable. We however recommend using the driver on diskette
that we have enclosed. This has been specially developed and
is faster than the Windows driver.
TARGUS High Speed driver (recommended)
Note: If you are not prompted to install the driver, Windows
will install the default driver automatically. Proceed then as
described on page 14 in the section on later installations of the
TARGUS High Speed driver.
1. To install the driver, insert theTARGUS installation diskette
in your PC drive.
2. Plug theTARGUS PC Card Cable into the PCMCIA slot of your
PC.
3. The window "Hardware Installation Wizard" opens. The
TARGUS PC Card Cable is recognized as "PCMCIA IDE /
ATAPI Controller".
(only Windows 2000: Confirm with "Next".)
4. In the next window, the default option for finding a
suitable driver for the device is selected. Confirm with
"Next".
16