C Hapter; Hardware Installation - Targus Noteworthy Instructions Manual

TARGUS Noteworthy DVD-ROM
C
HAPTER
1. Turn off the computer and all attached components.
2. Connect the cable to the drive.
4. Plug the PC Card Cable into any PC Card slot of your
computer.
6. Turn on your computer again.
7. You can now begin installing the software.
Computer
connection
"Plug&Play" with the PC Card Cable for Windows 95 /
98 / ME / 2000 / XP
The TARGUS PC Card Cable is Plug & Play compatible. This
means that in Windows 95, 98, ME, 2000 and XP, the card can
be inserted while the computer is powered on.
To remove the card, while the computer is powered on, first
stop the PC Card using the PC Card (PCMCIA) icon.
In Windows NT 4.0 the card must be inserted before the
computer is powered on.
6
1:

Hardware installation

connection to drive