Targus Noteworthy Instructions Manual page 11

Windows 98 Default Driver
No driver software is required to install the Windows default
driver.
1. Plug the TARGUS PC Card Cable into the PCMCIA slot of
your PC.
2. The window "Hardware Installation Wizard" opens. Your
TARGUS PC Card Cable is recognized as "Standard IDE/ESDI
Hard Disk Controller". Confirm with "Next" to continue the
installation.
3. In the next window the option for finding the best driver
for the device has been selected. Confirm with "Next".
4. In the next window uncheck all checkboxes and click "Next".
5. In the next window a search is performed for the new
driver. Click on "Next" to install the Windows default
driver.
6. In the next window, click on "Finish" to conclude the driver
installation. Your drive now appears with a new drive letter
under "My Computer".
Later Installation of the TARGUS High Speed driver
Note: For further information on the "Driver Choice" options
please refer to "Readme.txt" on the installation diskette.
To install the driver, insert the TARGUS installation diskette in
your PC drive.
1. Execute the "DriverChoice.exe" program, which is located
on the driver disk.
2. Select the TARGUS High Speed driver and click "Next".
Driver installation
11