Targus Noteworthy Instructions Manual page 15

5. Remove the disk from the disk drive and reboot the
computer.
6. After the reboot, a new hardware item is recognised. Insert
the disk in the drive again and follow the instructions as
described in the section "TARGUS High Speed driver",
starting with step 2. Your TARGUS PC Card Cable will be
recognised as "FREECOM_PCCARD_IDE".
Uninstalling the TARGUS High Speed driver
To uninstall the TARGUS High Speed driver, select the file
"DriverRemove.exe" on the installation diskette and follow
the on-screen instructions.
Assigning the drive letter under Windows 95/98/ME
After successfully completing the installation of the TARGUS
Noteworthy drive, a new drive letter is assigned automatically
(the first available letter after the internal hard drives). This can
shift the drive letter of an internal CD-ROM drive (for example,
'D' to 'E'). If this leads to problems, it is possible to change the
drive letter assignment as follows:
1. Click on "Start" - "Settings" - "Control Panel".
2. Click on "System".
3. Select "Device Manager" and click on "CD-ROM" or "Drive".
4. Click on the DVD Drive listed (such as QSI DVD), then on
"Properties" - "Settings". (The currently assigned drive
letter as well as the reserved drive letters will then be
displayed.)
Driver installation
15