Targus Noteworthy Instructions Manual page 17

5. (only Windows 2000) Select the floppy drive to install the
driver. Click on "Next".
6. (only Windows 2000) The driver is loaded from the diskette.
Click on "Next" to install the driver.
7. If a message appears that no digital signature from Micro-
soft Windows has been found, confirm with "Yes".
8. Confirm completion of the software installation in the
window that opens by clicking on "Finish". Your TARGUS
Noteworthy drive now appears with a new drive letter
under "My Computer". The installation is then complete.
Windows 2000 / Windows XP Default Driver
No driver software is required to install the Windows default
driver.
1. Plug the TARGUS PC Card Cable into the PCMCIA slot of
your PC.
2. Windows recognizes your TARGUS PC Card Cable as
"PCMCIA IDE/ATAPI Controller" and installs the necessary
driver without prompting.
3. After completion of the installation your TARGUS
Noteworthy drive appears with a new drive letter under
"My Computer". The installation is then complete.
Driver installation
17