Targus Noteworthy Instructions Manual page 19

4. Now all settings that you have specified are displayed. Click
"Start" to install the driver.
5. Remove the disk from the disk drive and reboot the
computer.
6. After the reboot, a new hardware item is recognised.Insert
the disk in the drive again and follow the instructions as
described in the section "TARGUS High Speed driver",
starting with step 2. Your TARGUS PC Card Cable will be
recognised as "FREECOM_PCCARD_IDE".
Uninstalling the TARGUS High Speed driver
To uninstall the TARGUS High Speed driver, select the file
"DriverRemove.exe" on the installation diskette and follow
the on-screen instructions.
Driver installation
19