Targus Noteworthy Instructions Manual page 22

TARGUS Noteworthy DVD-ROM
5. You can now decide if you want to the installation to
proceed automatically whereby the installation program
specifies the path and modifies your computer's startup
files (Please refer to point 10 of these instructions). However,
if you want to modify the settings, select "user-defined."
Please observe the further instructions in these instructions.
6. Read the following information screen and confirm with
the Enter key.
7. If you wish to select a different path, you can specify in
which directory the TARGUS software is to be installed.
Please enter the complete path name including the drive
letter! If the directory does not yet exist, it will be created.
8. The files will now be copied to the directory you specified.
9. After the files have been copied, you will have the
opportunity to modify the startup files of your computer
(CONFIG.SYS, AUTOEXEC.BAT). You can also display these
modifications or cancel the installation.
10. The installation updates your startup files and saves the
original versions under the name CONFIG.FC and
AUTOEXEC.FC.
11. After the startup files have been modified, you can leave
the installation program. In order for the changes to take
effect, you must restart your computer.
12. If you want to undo the installation, start the program
"UNINST.EXE" in the installation directory.
Note: After restarting your computer, additional boot messages
are displayed which are generated by the device drivers for the
device you just installed.
22