Connections; Cradle - Datalogic F732-E Wizard User Manual

2
2

CONNECTIONS

2.1

CRADLE

To make the F732-E terminal operative, it is necessary to insert it
in the Formula 952 Transceiver charger cradle which has been
previously connected to the power supply and to a host computer
with an available RS232 serial line.
The following figure describes the F952 cradle:
A
A) Red/Green LED:
Green = terminal not inserted or charge level being maintained
Red = charge in progress
B) Cradle on/off switch
C) Power jack (9 V)
D) RJ connector for connection to the host computer
CAUTION
6
B
Figure 4 - F952 Cradle Overview
The use of cradles other than those expressly
specified may damage the F732-E terminal.
F732-E WIZARD™
C D