Table of Contents
Advertisement
USE AND OPERATION
3.2
BARCODE SCANNING
When reading a barcode point the terminal laser beam at the code
from an appropriate distance and simultaneously press the
<SCAN> key. The beam emitted by the laser must completely
cover the barcode; the LED (and the acoustic signal, if activated)
will indicate if the scan was carried out correctly.
Figure 7 - F732-E Terminal Scanning a Barcode
NOTE
NO
OK
Throughout the operation of the application, the
battery icon
activated, the latter in accordance with the setting
of the terminal internal clock.
, and the time icon will always be
NO
OK
3
13
Advertisement
Table of Contents
