Download Print this page

Datalogic F732-E Wizard User Manual: Replacing The Batteries

Hide thumbs

Advertisement

4
NOTE
CAUTION
4.2

REPLACING THE BATTERIES

CAUTION
To replace the batteries correctly, proceed as follows.
1-
Turn over the terminal
and remove the two
battery cover screws.
16
During the battery recharge the color of the LED
positioned on the cradle changes from red to
green. If using the NiCd battery pack, the LED
color changes when 70-80% of the complete
charge is reached. If using the NiMh battery pack,
the LED color changes when 50-60% of the
complete charge is reached due to the battery
increased capacity.
If the terminal remains inactive for a prolonged
period such as two weeks, it is advisable to
download all the stored data onto a computer
and extract the battery pack.
Before proceeding, ensure that the terminal is
switched off and that the data it contains has
been downloaded onto the host computer.
F732-E WIZARD™

Advertisement

   Also See for Datalogic F732-E Wizard

   Related Manuals for Datalogic F732-E Wizard

Comments to this Manuals

Symbols: 0
Latest comments: