Download Print this page

Advertisement

QUICK START

Verify that the F732-E and all the parts supplied with the equipment
are present and intact when opening the packaging. Keep this
package should it be necessary for shipping to a technical
assistance centre.
When using the F732-E terminal for the first time:
1)
Install the battery pack by correctly inserting it into the F732-
E terminal (refer to par. 4.2 in this manual).
2)
Connect the F952 cradle to the power supply and to the PC
using the RS232 cable included in the package (refer to par.
2.1 and 2.2 in this manual for further details).
3)
Charge the batteries by positioning the terminal into the cradle.
4)
Install the EasyGen™ Demo software from the CD onto
your PC.
5)
Load an application program onto the F732-E terminal
through the F952 cradle using either EasyGen™ or
SysTools™2001 (see par. 1.3 of this manual for descriptions
of the various application development programs available).
Since the EasyGen™ interpreter program is pre-loaded onto
the F732-E terminal, you can easily get started by loading one
of the example application programs from the EasyGen™
Demo software installation. (see par. 2.4 in the EasyGen™
User's Manual or par. 3.3 in the SysTools™2001 User's
Manual).
The terminal is now ready to collect data. Press the Enter key
on the terminal to start the example program .
6)
Download the collected data to the PC using the
SysTools™2001 utility program. The data will be saved in the
specified .DAT Standard ASCII file (see par 4.2.1 under
Terminal Properties in the SysTools™2001 User's Manual).
xii

Advertisement

   Also See for Datalogic F732-E Wizard

   Related Manuals for Datalogic F732-E Wizard

Comments to this Manuals

Symbols: 0
Latest comments: