Sharpness
This section describes Sharpness control of AnalogControl category for the BG series.
This control adjusts the edge enhancement of the image.
This function is available only in Color models.
● Registers
Register
Sharpness
● Setting
- Set Sharpness
Set the following value to "Sharpness" register. Setting value is Integer type.
Larger value makes the edge strength stronger.
● Note
Sharpness control is available in following PixelForamt modes.
RGB8, YUV411_8, YUV422_8
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Visibility
Access
Expert
R/W
Set a sharpness level.
Sharpness
Minimum (*)
Maximum
Fig. Sharpness
Value
0 (OFF)
7
* initial factory setting
70 / 85
Description
http://www.toshiba-teli.co.jp/index.htm
D4211908E