- Select Saturation
Select the saturation component to control in "SaturationSelector" register.
Setting value is Enumeration type.
- Set Saturation
Set the following value to "Saturation" register. The value is to be applied to selected saturation
component. Setting value is Float type.
● Note
Hue/Saturation control is available in following PixelForamt modes.
RGB8, YUV411_8, YUV422_8
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
SaturationSelector
U (*)
V
Saturation
Minimum (*)
Maximum
69 / 85
Function
Saturation = U Gain
Saturation = V Gain
* initial factory setting
Value
x 0
x 2.5
* initial factory setting = x 1.0
http://www.toshiba-teli.co.jp/index.htm
D4211908E