Toshiba teli BG030 Instruction Manual page 69

Hue/Saturation
This section describes Hue/Saturation control of AnalogControl category for the BG series.
Hue control adjusts chroma phase of the image. And Saturation control adjusts chroma gain of the image.
This function is available only in Color models.
● Registers
Register
Hue
SaturationSelector
Saturation
● Setting
- Set Hue
Set the following value to "Hue" register. Setting value is Float type.
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
Fig. Hue/Saturation
Visibility Access
Beginner R/W Set a chroma phase.
Expert R/W Selects a saturation component to control.
Beginner R/W Set a chroma gain.
Hue
Minimum
Maximum
Description
Value
-40[°]
+35[°]
* initial factory setting = 0[°]
68 / 85
D4211908E
http://www.toshiba-teli.co.jp/index.htm