Toshiba teli BG030 Instruction Manual page 43

● Setting
- Set binning operation
Set the following value to "BinningHorizontal", "BinningVertical" registers. Setting value is Integer type.
"BinningHorizontal" is the number of horizontal pixel(s) to add. And "BinningVertical" is the number of
vertical pixel(s) to add.
Model
Minimum (*)
Maximum
● Note
The range of register setting depends on camera model.
Changing "BinningHorizontal", "BinningVertical" register value effects Scalable registers.
Changing "BinningHorizontal", "BinningVertical" register value is invalid during image stream data output.
Copyright © 2012 - 2013 TOSHIBA TELI CORPORATION, All rights reserved.
BG030 BG031
1(H)×1(V) 1(H)×1(V)
2(H)×2(V) 2(H)×2(V)
42 / 85
BG080 BG130
1(H)×1(V) 1(H)×1(V)
2(H)×2(V) 2(H)×2(V)
* initial factory setting
http://www.toshiba-teli.co.jp/index.htm
BG202
1(H)×1(V)
2(H)×2(V)
D4211908E