Installation; Typical Installation; Ventilate The Spray Booth; Grounding - Graco 3A0149C Instructions And Parts List

Installation

Installation

Typical Installation

NOTE: The typical installation shown in F
guide for selecting and installing air-assisted spray sys-
tems. Contact your Graco distributor for assistance in
designing a system to meet your needs.

Ventilate the Spray Booth

• To prevent hazardous concentrations of toxic
and/or flammable vapors, spray only in a properly
ventilated spray booth. Do not operate the spray
gun unless ventilation fans are operating.
• Check and follow all of the National, State, and
Local codes regarding air exhaust velocity
requirements.
• Check and follow all local safety and fire codes.
D
A
F . 1: Typical Installation (Model G15 Shown)
IG
Key:
A Air Line Filter
B Air Shutoff Valve
C Gun Air Pressure Regulator
D Air Line
E Spray Gun
F Electrically Conductive Fluid Hose
G Gun Air Supply Hose
6
. 1 is only a
IG
C
B

Grounding

• Check your local electrical code and pump man-
ual for detailed grounding instructions. Use only
electrically conductive fluid hoses.
• Ground the spray gun through connection to a
properly grounded fluid supply hose and pump.
E
G
TI6554A
F
3A0149C