APPENDIX 2 INTERFACE
USB interface
Standard:
Transfer type:
Transfer rate:
Class:
Control mode:
Number of ports:
Power source:
Connector:
LAN
Standard:
Number of ports:
Connector:
LED status:
Link LED (Green)
Activity LED (Orange)
LAN cable:
Cable length:
NOTE: When a generally-used twisted pair Ethernet (TPE) or UTP cable is used, a communication
error may occur depending on your operating environment. In such case, you may be
requested to use a shielded twisted pair cable.
Conforming to V2.0 Full speed
Control transfer, Bulk transfer
Full speed (12M bps)
Printer class
Status with the receive buffer free space information
1
Self power
Type B
Pin No.
Signal
1
VCC
2
D-
3
D+
4
GND
IEEE802.3 10BASE-T/100BASE-TX
1
RJ-45
LED
Link LED
Activity LED
Activity
10BASE-T: UTP category 3 or category 5
100BASE-TX: UTP category 5
Segment length Max. 100 m
Series B Plug
LED Status
Link
ON
10Mbps link or 100Mbps link is detected.
OFF
No link is detected.
* Communication cannot be made while
the Link LED is off.
ON
Communicating
OFF
Idle
A2- 3
EO1-33076
APPENDIX 2 INTERFACE
LAN status