Table of Contents
Advertisement
10. INSTALLING THE PRINTER DRIVERS
Windows 2000/XP
1.
Right-click on the printer icon. Select "Properties" to open the printer "Properties" dialog box.
2.
Select the "Ports" tab, and click on the [Add Port...] button. The "Printer Ports" dialog box is
displayed.
3.
Select "Seagull Scientific TCP/IP Port" from the "Available Printer Ports" list, then click on the
[OK] button.
4.
On the "Add Seagull TCP/IP Port" dialog box, enter the name or IP address, the port number,
and the port name. For the IP address and the port number, enter the same ones as you have
set. After entering these, click on the [OK] button.
5.
When addition of the port is completed, the port is added to the "Print to the following port(s)" list.
2.
Deleting a LAN Port
NOTE:
Before deleting a port, be sure to check if other printers also use it. If there are printers which use
the port to be deleted, change their port to another, before deleting the port.
Windows 98/ME
1.
Right-click on the printer icon. Select "Properties" to open the printer "Properties" dialog box.
2.
Select the "Details" tab, and click on the [Delete Port...] button.
3.
Select the port to be deleted, then click on the [OK] button.
4.
When deletion of the port is completed, the port is also deleted from the "Print to the following
port" list.
Windows 2000/XP
1.
Right-click on the printer icon. Select "Properties" to open the printer "Properties" dialog box.
2.
On the "Ports" tab, select the port to be deleted, then click on the [Delete Port] button.
3.
When deletion of the port is completed, the port is also deleted from the "Print to the following
port(s)" list.
10-16
10.5 ADDING/DELETING A LAN PORT
EO1-33076
Hide quick links:
Advertisement
Table of Contents
