Toshiba B-450-R SERIES Owner's Manual page 47

12. GENERAL MAINTENANCE
2. Fit the enclosed Allen Key into the right side of the cutter unit to rotate the cutter manually. Remove
the jammed paper and any paper particles from the cutter.
3. Clean the cutter with dry cloth.
Cutter
4. Assembling is reverse order of removal.
Cleaning the Strip Unit
1. Be sure to disconnect the power cord before cleaning the strip unit.
2. Do not touch the moving parts. To reduce the risk that fingers, jewelry, clothing, etc., be drawn into
the moving parts, push the switch in the "OFF" position to stop movement.
1. First push the strip lever toward the printer to release the hook, and then pull the strip lever.
2. Remove the jammed paper, if any.
3. Clean the strip guide rollers A and B with a cloth moistened with alcohol.
Strip Lever
Strip Guide Roller A
WARNING!
Strip Guide Roller B
12-4
EO1-33076
12.3 REMOVING JAMMED PAPER
Allen Key
Fig. 12-6
Fig. 12-7