Adding/Deleting A Lan Port - Toshiba B-450-R SERIES Owner's Manual

B-450-r series barcode printer
Table of Contents

Advertisement

10. INSTALLING THE PRINTER DRIVERS
10.5

ADDING/DELETING A LAN PORT

To use the LAN interface, first, you have to make the following settings (Refer to TOSHIBA TEC support
representative.)
• Set the printer IP address ("PRINTER IP ADRES"), the gateway IP address ("GATEWAY IP
ADRES"), and subnet mask ("SUBNET MASK").
• Set the port number ("SOCKET PORT").
Among these settings, the printer IP address and the port number are also required for adding a LAN port.
1.
Adding a LAN Port
Windows 98/ME
1.
Right-click on the printer icon. Select "Properties" to open the printer "Properties" dialog box.
2.
Select the "Details" tab, and click on the [Add Port...] button. The "Add Port" dialog box is
displayed.
3.
Select "Other".
Select "Seagull Scientific TCP/IP Port" from the list, then click on the [OK] button.
4.
On the "Add Seagull TCP/IP Port" dialog box, enter the name or IP address, the port number,
and the port name. For the IP address and the port number, enter the same ones as you have
set. After entering these, click on the [OK] button.
5.
When addition of the port is completed, the port is added to the drop down list for "Print to the
following port".
10-15
10.5 ADDING/DELETING A LAN PORT
EO1-33076

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

B-452-ts22-qq-rB-452-ts22-qp-r

Table of Contents