Tilt Steering Wheel - Toyota 4Runner 2003 Operating Manual

For owners in Canada
The symbol on a child restraint system
indicates the presence of a lower connec-
tor system.
CHILD RESTRAINT SYSTEM
INSTALLATION
Type A—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages around the tag on the
seat cushion.
2. Latch the hooks of lower straps onto
the anchorages and tighten the lower
straps.
Type B—
1. Widen the clearance between
seat cushion and seatback a little
and confirm the position of the low-
er anchorages around the tag on the
seat cushion.
2. Latch the buckles onto the anchor-
ages.
If your child restraint system has a top
strap, it should be anchored. (For the
installation of the top strap, see "—Using
a top strap" on page 84 in this section.)
88
'03 4Runner_U (L/O 0211)
For the installation details, refer to the
instruction manual equipped
product.
CAUTION
D
When using the lower anchorages
for the child restraint system, be
sure that there are no irregular ob-
the
jects around the anchorages or that
the seat belt is not caught.
D
Push and pull the child restraint
system in different directions to be
sure it is secure. Follow all the
installation instructions provided by
its manufacturer.
D
Do not install a child restraint sys-
tem on the rear seat if it interferes
the
with the lock mechanism of the
front seats. This can cause death or
serious injury to the child and front
passenger in case of sudden brak-
ing or a collision.

Tilt steering wheel

with each
To change the steering wheel angle,
hold the steering wheel, pull the lock
release lever toward you, tilt the steer-
ing wheel to the desired angle and re-
lease the lever.
When the steering wheel is in a low posi-
tion, it will spring up as you release the
lock release lever.
2003 4RUNNER from Oct. '02 Prod. (OM35804U)