If You Cannot Shift Automatic Transmission Selector Lever; If You Lose Your Keys - Toyota 4Runner 2003 Operating Manual

Hide thumbs Also See for 4Runner 2003:
Table of Contents

Advertisement

If you cannot shift automatic
transmission selector lever
If you cannot shift the selector lever
out of "P" position to other positions
even though the brake pedal is de-
pressed, use the shift lock override but-
ton as follows:
1. Turn the ignition key to "LOCK"
position.
Make
sure
the
brake is set.
2. Pry up the cover with a flat- bladed
screwdriver or equivalent.
294
3. Insert the screwdriver or equivalent
into the hole to push down the shift
lock override button. You can shift
out of "P" position only while push-
ing the button.
4. Shift into "N" position.
parking
5. Insert the cover.
6. Start the engine. For your safety,
keep the brake pedal depressed.
Be sure to have the system checked by
your Toyota dealer as soon as possible.
'03 4Runner_U (L/O 0211)

If you lose your keys

You can purchase a new key at your
Toyota dealer if you can give them the
key number and master key.
Even if you lose only one key, contact
your Toyota dealer to make a new key. If
you lose all your master keys, you cannot
make new keys; the whole engine immobi-
liser system must be replaced.
See the suggestion given in "Keys" on
page 10 in Section 1- 2.
If your keys are locked in the vehicle and
you cannot get a duplicate, many Toyota
dealers can still open the door for you,
using their special tools. If you must
break a window to get in, we suggest
breaking the smallest side window be-
cause it is the least expensive to replace.
Be extremely cautious to avoid cuts from
the glass.
2003 4RUNNER from Oct. '02 Prod. (OM35804U)

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents