Toyota 4Runner 2003 Operating Manual page 25

If the "LOCK" or "UNLOCK" switch is kept
pressed in, the locking or unlocking opera-
tion is not repeated. Release the switch
and then push again.
The following adjustments can be made in
this system. For details, contact your
Toyota dealer.
D
Cancelling the wireless door locking or
unlocking function
D
Cancelling the flash of the turn signal
lights
D
Changing the volume of beep sound
'03 4Runner_U (L/O 0211)
OPENING THE BACK WINDOW
To open the back window, push the
back window open switch of the trans-
mitter for about 1 second. The window
will fully open.
At this time, you can hear a beep.
If the ignition switch is in the "ON" posi-
tion, the back window cannot be opened
by the back window open switch.
To open the back window with the key,
see "Power back window" on page 26 in
this section.
The back window opening program by
wireless remote control can be changed or
disabled. For details, contact your Toyota
dealer.
"PANIC" SWITCH
Pushing the "PANIC" switch blows the
horn intermittently and
headlights, tail lights and turn signal
lights, and turns on the interior and
luggage compartment lights.
The "PANIC" switch is used to deter ve-
hicle theft when you witness anyone at-
tempting to break into or damage your
vehicle.
The alarm will last for one minute. To stop
alarm midway, push any of the switch on
the wireless remote control transmitter.
You can also stop the alarm by turning
the ignition key from "LOCK" to the "ON"
position.
2003 4RUNNER from Oct. '02 Prod. (OM35804U)
flashes the
19