Toyota 4Runner 2003 Operating Manual page 205

"AUTO" button
For automatic operation of the air condi-
tioning, push the "AUTO" button. An indi-
cator light will illuminate to show that the
automatic operation mode has been se-
lected.
In the automatic operation mode, the air
conditioning selects the most suitable fan
speed, air flow, air intake and on–off of
the air conditioning according to the tem-
perature.
When you push the "AUTO" button with
the air intake mode at FRESH, internal
circulation may be applied for maximum
cooling.
You may use manual controls if you want
to select your own settings.
To turn off the automatic operation, push
the "OFF" button.
Fan speed selector
Select the mode button you desire to ad-
just the fan speed and push it. An indica-
tor light will illuminate to show which fan
speed mode is being selected.
In automatic operation, you do not have
to adjust the fan speed unless you desire
another fan speed mode.
'03 4Runner_U (L/O 0211)
Temperature selector
To increase the temperature, push the
"UP" side, to decrease it, push
"DOWN" side.
"LO" appears when you adjust to maxi-
mum cooling, and "HI" appears when you
adjust to maximum warming.
"OFF" button
Push the "OFF" button to turn off the air
conditioning system.
the
Air flow selector
Push one of the buttons to select the
vents used for air flow. An indicator light
will illuminate to show which air flow
mode is being selected.
In automatic operation, you do not have
to select the air flow unless you desire
another air flow mode.
1. Panel—Air flows from the instrument
panel vents and rear vents.
2. Bi–level—Air flows from both the floor
vents, the instrument panel vents and
rear vents.
3. Floor—Air flows mainly from the floor
vents.
2003 4RUNNER from Oct. '02 Prod. (OM35804U)
199