Head Restraints - Toyota 4Runner 2003 Operating Manual

WHEN RETURNING THE SEATBACK
If you cannot raise the seatback be-
cause of the locked seat belt, do not
try it forcibly. Release the lock of the
seat belt in the following way. Push in
the lower front edge of the seatback
cushion to slacken the seat belt (1) and
let the seat belt retract a little (2).
48
'03 4Runner_U (L/O 0211)
CAUTION
When returning seats to their original
position, observe the following pre-
cautions in order to prevent personal
injury in a collision or sudden stop:
D
Make sure the seatback is securely
locked by pushing forward and rear-
ward on the top of the seatback.
Failure to do so will prevent the
seat belt from operating properly.
D
Make sure the seat belts are not
twisted or caught in the seatback
and are arranged in their proper
position and are ready to use.
D
Make sure the bottom cushion is
securely locked by trying to pull up
the edge of the cushion near the
lock release straps.
D
Make sure to arrange the buckles of
the seat belts in their proper posi-
tion and be ready to use.

Head restraints

Front
Rear
2003 4RUNNER from Oct. '02 Prod. (OM35804U)