General Problems - Wacom cintiq companion User Manual

3. Test tilt for the x-axis by moving the pen from a vertical position toward the right; the X T
change from approximately 0 to +60. Now move the tool to the left of vertical; the X T
change from approximately 0 to - 60.
4. Test the tilt for the y-axis by moving the pen from a vertical position toward the bottom of the tablet; the
Y T value should change from approximately 0 to +60. Now move the tool toward the top of the
ILT
tablet; the Y T value should change from approximately 0 to - 60.
ILT
5. For the optional Art Pen, test the rotation feature by placing the pen tip on the screen surface and
slowing rotating the pen on its axis. The R
6. When you are done, click on the C

GENERAL PROBLEMS

No display.
When a still image is displayed
for a long period of time
without refreshing the screen,
an after-image remains for a
short period of time.
Color quality is inaccurate, or
the color white does not
display as white.
Windows-specific problems
Support options
Contents
OTATION
button to exit the dialog box.
LOSE
• Verify that the Cintiq is turned on and has sufficient battery charge
(the Battery Status LED should be green).
• If the Cintiq is connected to a power source, make sure the LED is
amber, indicating that the battery is being charged.
• Restart your Cintiq:
• 1) Hold down the Power button for approximately 5 seconds
2) Wait a few seconds
3) Hold down the Power button for 2-3 seconds
• See also 'Color quality is inaccurate' (below).
Use a screen saver or other power management feature.
You can use the Intel Graphics & Media Control Panel to adjust color,
resolutions, brightness, and other settings for your Cintiq. You can
open the Intel Control Panel from the Start screen tile.
If you do not see a tile for the Intel Control Panel, check the Windows
Control Panel to make sure it is installed. If it is not installed, you can
download the driver for the Intel Control Panel from the Intel web site.
Contents Index
Index
value should change as you rotate the pen.
52
value should
ILT
value should
ILT
52