Replacing The Pen Nib - Wacom cintiq companion User Manual

REPLACING THE PEN NIB

The pen nibs will wear with normal use. To protect your Cintiq from damage and for best performance,
periodically replace your pen nibs.
1. To replace your pen nib, use the nib removal tool, a pair of tweezers, needle-nosed pliers, or similar
instrument to pull the nib straight out of the pen.
2. Use the same tool to grasp the new nib and place it into the end of the pen.
3. Slide the end of the new nib straight into the barrel of the pen. Firmly push the nib until it stops.
Nib Replace when 1 mm
(0.04 inch) or less.
Warning
Choking hazard. Prevent children from swallowing the pen nib or side switch. The pen nib or side switch
may accidentally be pulled out if children are chewing on them.
For replacement parts, see
Important:
• When not in use, place the pen in the pen case, or lay it flat on your desk.
• When the optional Airbrush is not in use, lay it flat on your desk.
• To maintain the sensitivity of your input tools, do not store them in a container where they will rest
on their tip or eraser. Improper storage may damage the pen tip pressure sensor(s).
Contents
Ordering parts and
Contents Index
Index
accessories.
61
61