Connection Example - Panasonic WV-NW960 Installation Manual

Connection example

When connecting with a PC directly
Amplifier built-in speaker
(procure locally)
Plug-in power type microphone
(procure locally)
<Required cables>
Ethernet cable (category 5, cross)
When connecting to a network (hub)
Amplifier built-in speaker
(procure locally)
Plug-in power type microphone
(procure locally)
Amplifier built-in speaker
(procure locally)
Plug-in power type microphone
(procure locally)
<Required cables>
Ethernet cable (category 5, straight)
Important:
• The monitor out connector is provided only for checking the adjustment of the angular field of view on the video
monitor when installing the camera or when servicing. It is not provided for recording/ monitoring use.
• Depending on the monitor, some characters (camera title, preset ID, etc.) may not be displayed on the screen.
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• Power supply is required for each network camera.
RJ45 conversion connector (provided)
Recommended total extended cable length: 1 m
RJ45 conversion connector (provided) RJ45 conversion connector (provided)
Monitor (only for
adjustment)
RJ45 conversion connector (provided)
Recommended total extended cable length: 1 m
PC
Ethernet cable (category 5, cross)
Hub
Ethernet cable
(category 5, straight)
To an outlet
(24 V AC)
for WV-NW964
To an outlet
(220 V to 240 V AC)
for WV-NW960
Ethernet cable
(category 5, straight)
To an outlet
(24 V AC) for WV-NW964
To an outlet
(220 V to 240 V AC)
for WV-NW960
To an outlet
(24 V AC) for WV-NW964
To an outlet
(220 V to 240 V AC) for WV-NW960
Ethernet cable
(category 5, straight)
PC
Monitor (only for
adjustment)
21