Panasonic WV-NW960 Installation Manual page 18

Important:
• The stopper of the front/rear sun shields should be
fitted up to attach them together before attaching
to the sun shield.
• Don not put the safety wire inside the sun shield.
• The safety wire is designed to support weight of
the camera. Do not load more than the weight of
the camera.
Step 6
Fix the front/rear sun shields to the sun shield.
• Put the attached front/rear sun shields and the sun
shield together while matching the mark h and the
mark g (START) on the sun shield, and then rotate
the front/rear sun shield clockwise until the mark h
reaches the mark g (LOCK) on the sun shield.
Match with this mark
Step 7
Fix the front/rear/sun shields with the sun shield using
the fixing screws for the front/rear sun shield.
Fixing screws for the front/rear sun shield
18
Front/rear sun shield
Sun shield
Important:
• When the power is turned on, the camera will start
rotating and the position will automatically be initial-
ized.
• Do not touch the camera in the process of the ini-
tialization. Otherwise, it may fail to initialize and
may cause malfunction.
• When the camera has been inadvertently touched
and moved after the initialization is complete, the
preset positions may be inaccurate. In this case,
use the position refresh function or restart the cam-
era to correct the preset positions.
Refer to the setup instructions (PDF) for further
information.
• To detach the front/rear sun shield, do steps 5 - 7
reversely.