[Connection Example] - Panasonic WV-NP240 Operating Instructions Manual

[Connection example]

When connecting with a PC directly
AC adapter (DC 12 V) or AC 24 V power supply
To an outlet
(AC 230 V)
(WV-NP244 is shown above.)
<Required cable>
LAN cable (category 5, cross)
When connecting to a network using a PoE device (hub)
Video monitor
(for adjustment use only)
<Required hardware>
Switching hub or router, PoE device (hub)
<Required cable>
LAN cable (category 5, straight)
Switching hub or router,
PoE device (hub)
LAN cable
(category 5, straight)
LAN cable
(category 5, straight)
Video monitor
(for adjustment use only)
LAN cable
(category 5, straight)
PC
Important:
• The monitor out connector is provided only
for checking the adjustment the angular field
of view on the video monitor when installing
the camera or when servicing. It is not provid-
ed for recording/monitoring use.
• Use a switching hub or a router which is com-
pliant with 10BASE-T/100BASE-TX.
• Power supply is required for each network
camera. When using a PoE device (hub), AC
24 V/DC 12 V power supply is unnecessary.
PC
LAN cable (category 5, cross)
17