Panasonic WV-NW484S Specifications

Network camera designed for heavy duty use featuring Super Dynamic III

Key Features

• MPEG-4/JPEG digital signal output at VGA image size with up to 30 ips.
• MPEG-4 and JPEG dual stream output for simultaneous live
monitoring and high resolution recording.
• Progressive output provides clear images even when the subject is moving.
• Super Dynamic III technology delivers 128x wider dynamic range
compared to conventional cameras.
• High sensitivity with Day-Night function: 0.6 lux (Color), 0.08 lux
(B/W) with clear dome cover.
• Adaptive Digital Noise Reduction: Selectable use of either 2D-DNR
or 3D DNR ensures noise reduction in various conditions.
• Up to 32x automatic electronic sensitivity enhancement.
• Electronic shutter for anti flicker.
• 3.8 ~ 8.0 mm, 2x varifocal lens built-in.
• Auto Back Focus (ABF) ensures easy installation and stable focus in
both color and B/W modes.
• Scene Change Detection alarms when lens is covered, spray
painted, removed or defocused.
• Video Motion Detector with 4 programmable detection areas and 3
sensitivity levels.
• Auto image stabilizer for applications where vibration or wind is a concern.
• Flexible digital zoom and pan/tilt operation: Up to 3x variable digital
zoom and pan/tilt can be set in the setup menu (effective both for
analog and network video). 2x or 4x digital zoom and pan/tilt can be
controlled by the browser GUI for network video.
• Camera title displays: Up to 16 (OSD) and 20 (on browser) alphanumeric characters.
• SD Memory card slot for alarm recording and backup upon network failure.
• Alarm sources include Terminal input, VMD and Panasonic alarm
command, and can trigger actions including SD memory recording/
FTP image transfer, E-mail notification, Alarm indication, Terminal
output and Panasonic protocol output.
• Built-in network interface (10Base-T / 100Base-TX).
• Power over Ethernet (PoE) IEEE 802.3af.
• Multiscreen: Images from 8 cameras can be displayed in two separate Quad
screens (JPEG only). 20 characters camera title is available for each camera.
Vandal Resistant Fixed Dome Network Camera
WV-NW484S
(24 V AC, 12 V DC or PoE)
<Smoke Dome Type>
• FTP client function enables periodic image data transfer or transfer upon alarm.
• Alarm e-mail notification
• Max bit rate/client for MPEG-4 (64 / 128 / 256 / 512 / 1,024 / 1,536 / 2,048 /
3,072 / 4,096 kbps) combined with Total bit rate control (64 / 128 / 256 / 512 /
1,024 / 2,048 / 4,096 kbps / Unlimited) allowing flexible network management.
• Supported Protocol: TCP/IP, UDP/IP, HTTP, FTP, SMTP, DHCP,
DNS, DDNS, NTP, RTP and SNMP.
• Multi-language GUI and setup menu: English, French, Italian,
Spanish, German, Russian (PAL), English, French (NTSC),
(Installation required except for English).
• IP66 rated water and dust resistant. IEC60529 measuring standard compatible.
• Dehumidification device for use in various weather conditions.
• Vandal resistant mechanism for high reliability
• Three-way hinge (horizontal, vertical and swivel rotation) for easy installation
• Optional heater maintains operating temperature –30 °C ~ +50 °C
(–22 °F ~ 122 °F) when operated by 24 V AC or PoE.

Standard Accessories

• CD-ROM* ..................................... 1 pc.
• Operating Instructions, Basic Manual ... 1 pc.
• Label (MAC address) ................... 1 pc.
The following are for installation.
• 4-pin Alarm Cable ........................ 1 pc.
• RJ-45 female-female conversion
connector ..................................... 1 pc.

Optional Accessories

Heater Unit
WV-CW4H
Super Dynamic III
WV-NW484S
WV-NW484S
(24 V AC, 12 V DC or PoE)
<Clear Dome Type>
• Mounting Bracket ......................... 1 pc.
• Driver Bit ...................................... 1 pc.
• Waterproof tape (butyl rubber tape) ... 1 pc.
* The CD-ROM contains Panasonic IP Setup
Software, viewer software "Network Camera
View3", and Standard Operation Manual/
Standard Setup Manual (PDF)
Embedded Ceiling Clear Dome Cover
Mount Bracket
WV-CW4C
WV-Q169
(NTSC only)
Smoke Dome Cover
WV-CW4S
(PAL only)