Step 3: Configure Your Forerunner; Step 4: Acquire Satellite Signals - Garmin FORERUNNER 405 Quick Start Manual
Gps enabled sports watch with wirelesss sync
Hide thumbs
Also See for FORERUNNER 405:
- Owner's manual (56 pages) ,
- Declaration of conformity (1 page) ,
- Important safety and product information (46 pages)
Table of Contents
Advertisement
Forerunner with GPS on for up to 8
hours. See the owner's manual for
more information.
Step 3: Configure
Your Forerunner
The first time you use your
Forerunner, follow the on-screen
instructions to learn how to use the
bezel and configure the Forerunner.
If you are using an ANT+ heart
rate monitor, select
configuration to allow the heart rate
monitor to pair (connect) with your
Forerunner. See Step 5 for more
information.
Yes
during the
Step 4: Acquire
Satellite Signals
To set the correct time of day and
begin using the Forerunner, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
noTe: To turn off the
GPS receiver and use the
Forerunner indoors, touch and
hold gPS. Select
noTe: You cannot acquire
satellites in power save mode.
To exit power save mode,
enter
press
1. Go outdoors to an open area. For
the best reception, make sure
the antenna of the Forerunner is
oriented toward the sky.
Forerunner 405 Quick Start Manual
off
for gPS.
or quit.
Advertisement
Table of Contents
