Configure; Step 3: Configure Your Forerunner; Step 4: Acquire Satellite Signals - Garmin Forerunner 405 Owner's Manual

Chargng
clp
Step 3: Configure
Your Forerunner
The first time you use your
Forerunner, follow the on-screen
instructions to learn how to use the
bezel and configure the Forerunner.
If you are using an ANT+ heart
rate monitor, select
configuration to allow the heart rate
monitor to pair (connect) with your
Forerunner. See Step 5
information.
Forerunner 405 Owner's Manual
Yes during the
for more
Step 4: Acquire
Satellite Signals
To set the correct time of day and
begin using the Forerunner, you must
acquire GPS satellite signals. It may
take a few minutes to acquire signals.
note: To turn off the
GPS receiver and use the
Forerunner indoors, see
page 21.
note: You cannot acquire
satellites in power save mode.
To exit power save mode,
enter
press
1. Go outdoors to an open area. For
the best reception, make sure
the antenna of the Forerunner is
oriented toward the sky.
Getting Started
or quit.
5