Paper Problems - Canon LBP 5300 User Manual

Paper Problems

Paper comes out wrinkled.
Cause 1
Remedy
Cause 2
Remedy
Paper curls.
Cause 1
Remedy 1 Replace the paper with new one and print again. (See "Paper Requirements,"
7
Remedy 2 Set [Special Print Mode] to [Special Settings 1] in the printer driver. If this solves
Cause 2
Remedy
When performing black and white printing with [Paper Type] in the [Paper Source] sheet set
to [Plain Paper], corners of the printed paper are folded, the output paper is stained, or a
paper jam occurs.
Cause
Remedy 1 Replace the paper with one that can be used with this printer. (See "Paper
7-48

Paper Problems

Paper is loaded in the paper cassette or multi-purpose tray at an angle.
Load the paper in the paper cassette or multi-purpose tray straight. (See
"Loading Paper in the Paper Cassette," on p. 3-17, "Loading Paper in the
Multi-purpose Tray," on p. 3-33)
Paper is damp since the paper has been stored in unsuitable condition.
Replace the paper with new one and print again. (See "Paper Requirements,"
on p. 3-2)
Paper is damp since the paper has been stored in unsuitable condition.
on p. 3-2)
the problem, set [Special Print Mode] to [Off].
In order to specify the setting for [Special Print Mode], display the [Advanced
Settings] dialog box by clicking [Finishing Details] in the [Finishing] sheet, and
then clicking [Advanced Settings] in the [Finishing Details] dialog box.
Paper is inappropriate.
Replace the paper with one that can be used with this printer. (See "Paper
Requirements," on p. 3-2)
Paper is inappropriate.
Requirements," on p. 3-2)