Performing Calibration Automatically At The Designated Time - Canon LBP 5300 User Manual

A confirmation message is displayed.
3
Click [OK].
Performing Calibration Automatically at the Designated
Time
Perform calibration automatically at the designated time using the following
procedure.
IMPORTANT
When the printer is under any of the following status, calibration is not performed even if
the specified time has come.
- When the printer is printing, or an error has occurred (Calibration is performed after the
job is completed or the error is resolved)
- When the time specified in the [Calibration Settings] dialog box has come within 30
minutes after performing calibration last time
1
Display the Printer Status Window.
For details on methods for displaying the Printer Status Window, see "Displaying
the Printer Status Window," on p. 5-93.
Calibrating the Printer
6
6-19