Using A Lan Cable - Canon LBP 5300 User Manual

Using a LAN Cable

The printer can be connected to a network using a Category 5 twisted pair cable.
Have cables or a hub ready as needed.
NOTE
If this printer is connected to a network, network settings will need to be configured, the
printer will need to be installed as a network printer, and the print server will need to be
configured. For details on these settings, see the instruction manual supplied with the
network operating system or "Network Guide".
2
■ Network Environment
This printer supports 10BASE-T/100BASE-TX connections.
IMPORTANT
• This printer cannot be connected to networks other than those listed above.
• Make sure that there is a port available on the hub to which the printer will be connected.
An additional hub must be installed if there is no free port.
NOTE
When connecting to the 100BASE-TX Ethernet network, all the devices to be connected
to LAN, such as hub, LAN cable, and network board for computer, must support
100BASE-TX. For more details, contact your local authorized Canon dealer.
2-30 Connecting to a Computer
Computer that
supports 100BASE-TX
LAN Connector
Computer that
supports 10BASE-T
Ethernet Cable
Hub