Additional Information; Dimming The Display; Dts Cd Setting; Setting The Sleep Timer - Pioneer RCS-656HX Operating Instructions Manual

Additional information

Chapter 7
Additional information
Important
• To access green functions on the remote, move the
slider switch from MAIN to SUB.
/ /
SETUP
1 2
ENTER
4 5
MCACC
7 8
SURROUND ADVANCED
0
+
INPUT CHANNEL
–
MAIN SUB

Dimming the display

You can choose to dim the display if you find it too bright.
1 Press SETUP.
2 Use the buttons to select DIMMER then
press ENTER.
3 Use the buttons to select LIGHT or DARK
then press ENTER.

DTS CD setting

If you play a DTS-encoded CD, you will need to change
this setting to hear the decoded signal.
1 Switch the system into standby.
2 Press SETUP.
3 Use the buttons to select CD TYPE from the
menu, then press ENTER.
4 Use the buttons to select a setting, then
press ENTER.
Select from:
• NORMAL – Use for playback of regular audio CDs.
Some DTS-encoded CDs will output noise when played.
• DTS-CD – Use for playback of DTS-encoded CDs, but
note that the beginning of regular CD tracks may be
skipped.
Note
1 The display dims when the sleep timer is set, regardless of this setting.
2 The display dims when the sleep timer is set. The DVD recorder does not automatically switch off with the sleep timer.
TIMER REC REC MODE
+
SR ONE TOUCH COPY
3
MENU
6
TEST TONE VIDEO IN
9
SOUND TV/DVD
CLEAR
JUKE BOX
+
VOLUME DISPLAY
–
RDS DISP
AXD7442

Setting the sleep timer

SURROUND ADVANCED
SLEEP
INPUT
MAIN
The sleep timer switches off the receiver subwoofer after
a specified time so you can fall asleep without worrying
2
about it.
1 Press the SLEEP button to select an option.
Choose between the following options:
• SLP ON – Switches off after about an hour
• SLP OFF – Cancels the sleep timer
After selecting SLP ON, you can press SLEEP again to
check how much time is left. Each line indicates
1
approximately 12 minutes (remaining):
S L P - - - - -

Resetting the system

Use this procedure to reset all system settings to the
factory default.
1 Switch the system on.
2 Press and hold SURROUND then press the
STANDBY/ON button on the display unit.
The next time you switch on, all the system settings
should be reset.
SOUND TV/DVD
0
CLEAR
JUKE BOX
+ +
CHANNEL VOLUME DISPLAY
– –
RDS DISP
SUB
AXD7442
07
33
En