Pioneer RCS-656HX Operating Instructions Manual page 113

Copying and backup
• Preview – Check the content of a title in the Copy
List.
• Divide – Divide a title in the Copy List into two (see
Divide on page 105).
• Combine – Combine two titles in the Copy List into
one (see Combine on page 108).
• Chapter Edit – Edit chapters within a Copy List title
(see Chapter Edit on page 105):
• Divide – Divide a chapter into two.
• Erase/Move – Erase a chapter/Change the chapter
order.
• Combine – Combine two chapters into one.
• Set Thumbnail – Set the thumbnail frame for a title
(see Set Thumbnail on page 103).
• Recording Mode – Set the picture quality of the copy
(see Recording Mode on page 114).
• Bilingual – Set how bilingual audio should be copied
when copying from HDD to Video mode DVD (see
Bilingual on page 114).
• Cancel – Exit the menu.
Repeat this step for as many titles you have that need
editing.
ENTER
9 Display the command menu panel.
ENTER
10 Select 'Next' to proceed.
Copy
HDD DVD (Video mode)
Title Edit
20:00 Wed
1
2 20:00 Wed
20:00
Copy List Total
Current DVD Remain
There are several options available from the next screen:
• Select Recording Mode if you want to change the
recording quality (see Recording Mode on page 114).
• Select Input Disc Name if you want to change the
disc name. Input a name of up to 64 characters for a
VR mode disc or 40 characters for a Video mode disc
or DVD+R/+RW. (The input method is similar to that
of naming titles; see Title Name on page 103.)
• Select Finalize if you want to automatically finalize a
Video mode DVD or DVD+R after copying.
title menu style from the following screen.
Note
1 Titles recorded in MN1 to MN6, SEP, SLP or EP mode cannot be copied to DVD+R/+RW using high-speed copy.
2 If a timer recording is scheduled to start during copying, the disc will not be finalized.
2 Title
1 > 2 > 3
29/03 Pr 2 SP
22/03 Pr 2 SP
Back
Next
Wed29/03 Pr 2 SP
1h00m(2.0G)
4.3G
4.3G
2
Select a
ENTER
11 Select 'Start Copy' to start copying.
Copy HDD DVD (Video Mode)
Start Copy
HDD
Copy Time 0h 16m
Recording Mode High-Speed
Disc Name
Finalize Off
Copy List Total
Current DVD Remain
• If you're using a DVD-R DL or DVD+R DL disc and
the copy will span both layers, the Copy List Total
bar will be purple.
• The Current DVD Remain bar will be half-length if
the first layer of a DVD-R DL or DVD+R DL disc is
already full.
Copying from DVD to HDD
Important
• The DVD to HDD Copy screen isn't accessible when
a finalized Video mode disc or a DVD-Video is loaded.
As long as the disc is not Copy Guard protected, you
can still use the One Touch Copy function, however
(See One Touch Copy on page 110).
• The recorder can only store one Copy List at a time.
• The Copy List will be erased if:
– any of the titles on the DVD disc are erased or edited.
– the disc tray is opened.
– playback is switched between Play List and Original.
– the DVD disc is re-initialized or finalized.
– the recorder is reset to its factory settings (see
Resetting the recorder on page 153).
• It may not be possible to copy from a DVD disc that
was recorded on a different DVD recorder or a PC.
1 Select 'Copy' from the Home Menu.
HOME MENU
ENTER
2 Select 'DVD/CD
1
ENTER
3 Select a Copy List type.
• Selecting Create New Copy List will erase any Copy
List already stored in the recorder.
ENTER
4 Add titles to the Copy List (highlight a
title and press ENTER to add).
Titles you've added to the Copy List are highlighted in pink.
1 > 2 > 3
DVD-RW
Video Mode Return
Recording Mode
Input Disc Name
Finalize
Start Copy
4.3G
4.3G
HDD'.
11
113
En