Recording Mode; Using Disc Backup - Pioneer RCS-656HX Operating Instructions Manual

Copying and backup
11
ENTER
5 Select 'Next' from the command menu
panel to proceed to the title edit screen.
ENTER
6 Select a title to edit.
A menu appears of Copy List editing commands:
• Erase – Erase individual titles from the Copy List (see
Erase on page 102).
• Move – Change the order of titles in the Copy List
(see Move on page 107).
• Preview – Check the content of a title in the Copy List.
• Cancel – Exit the menu.
Repeat this step for as many titles you have that need
editing.
ENTER
7 Select 'Next' from the command menu
panel to proceed to the copy options screen.
• Select Recording Mode if you want to change the
recording quality (see Recording Mode on page 114).
ENTER
8 Select 'Start Copy' to start copying.

Recording Mode

ENTER
1 Select 'Recording Mode' from the
command menu panel.
ENTER
2 Select a recording mode for the copy.
• High-Speed Copy
same recording quality as the original.
• XP, SP, LP, EP, SLP, SEP, MN
copied at the specified recording quality in real-time.
(Note that if you copy at a higher quality setting than
the original, the copy will not be better quality than
the original.)
If you select MN above, you can also change the level
setting (MN1 to MN32
Quality box that appears.
Note
1 When copying to a Video mode DVD or DVD+R/+RW, the chapter markers in the copy may not be in exactly the same position as the original.
2 When the copy mode is set to something other than High-Speed Copy for copying to a Video mode DVD or DVD+R/+RW, the chapter markers
of the original are not copied. Chapter markers are put into the copy at regular intervals, according to the Auto Chapter setting (see also Auto
Chapter (Video)) and Auto Chapter (DVD+R/+RW) on page 135.
3 When copying to a DVD+R/+RW, MN1 to MN3 and SEP modes are not available.
4 Optimized mode only available when copying to DVD.
5 It is not possible to play this material directly from the HDD.
114
En
1
– The Copy List is copied at the
2
– The Copy List is
3
or LPCM) from the Recording
2,4
• Optimized – The recording quality is automatically
adjusted so that the Copy List fits on to the space
available on the disc. Copying is carried out in real-
time.
When you change the recording mode setting, you can
see how much disc space it will require. If this is more
than is available, it shows up in red and you won't be able
to start copying. In this case, either change the recording
quality, or press RETURN/EXIT to go back to the Copy List
screen and erase one or more titles from the Copy List.
Bilingual
ENTER
1 Select the title containing the audio you
want to change.
ENTER
2 Select 'Bilingual' from the command
menu panel.
ENTER
3 Select a bilingual audio option.

Using disc backup

* See also Copyright on page 110.
This feature offers a simple way to make a backup copy
of a finalized Video mode disc or DVD+R/+RW. The data
is copied first to the hard disk drive
recordable DVD disc.
1 Select 'Copy', then 'Disc backup' from
HOME MENU
the Home Menu.
ENTER
2 Select a backup option.
Start new disc back-up
Resume writing data
Erase back-up data
There are three backup options:
5
, then on to another