Pioneer RCS-656HX Operating Instructions Manual page 104

Editing
10
Erase Section
HDD DVD (VR) DVD-RAM
Using this command you can delete a part of a title, ideal
for cutting out the commercial breaks in a recording
made from the TV.
ENTER
1 Highlight the title containing the section
you want to erase.
ENTER
2 Select 'Edit' > 'Erase Section' from the
command menu panel.
ENTER
3 HDD only: Select the type of edit.
• For more information about these options, see
Editing accuracy on page 101.
4 Highlight 'From' then use the playback controls
( , , , , etc.) to find the start of the section
to erase, then press ENTER.
The bar at the bottom of the screen indicates the current
play position in the title. After pressing ENTER, a marker
shows the start of the section.
Erase Section (HDD)
From
To
Exit
104
En
!
DVD RECORDER
Please select the type of editing.
Video Mode Compatible Editing is
recommended for compatibility with
high-speed copying.
Video Mode Compatible Editing
Frame Accurate Editing
23:00 Fri 3/12 Pr 4 SP
Rec. time 2h00m
10-1 00.00.09.15
Play Pause
ENTER
5 Highlight 'To' then, in the same way, find
the end of the section to erase, then press ENTER.
After pressing ENTER, another marker indicates the end
of the section, with the section itself marked in red.
ENTER
6 Select 'Yes' to confirm, or 'No' to cancel.
In the thumbnail viewer you can see a few seconds of
video either side of the marked section to see how the
edit will look.
• When editing VR mode Original content, you may not
be able to erase very short sections (less than five
seconds).