Using The Scart Av Output; Recording Mode - Pioneer DCS-575 Operating Instructions Manual

Other connections
• Connect the LINE 3 AUDIO IN jacks to the
analog outputs of an external playback
component.
Connect using RCA pin-plug stereo cables.

Using the SCART AV output

The SCART output should give you better
picture quality than the standard composite
video output. The SCART AV connector
functions as both a video and audio output.
• Use a commercially available SCART cable
to connect the (LINE 1) AV CONNECTOR to
your TV.
To SCART
input
OPTICAL
LINE 2
DIGITAL IN
SCART pin assignment
The diagram below shows the SCART 21-pin
connector assignment. This connector
provides the video and audio signals for
connection to a compatible color TV/monitor.
Pin No. Assignment
1 Audio R OUT
Note
1 SCART cables are available in several configurations. Make sure that the one you get will work with this system and your TV/
monitor (see SCART pin assignment below).
2 • When the recording mode is on, most sound features cannot be used. The display will briefly blink REC MODE if you try and
use a prohibited function while the recording mode is on.
• When the recording mode is off, the audio from the analog output jacks may be interrupted, depending on the operation.
• The recording mode switches off if you change the input function (DVD/CD, TUNER, etc.) or switch the power off.
TV
LINE 1
AV CONNECTOR
IN
MCACC
SETUP MIC CONTROL VIDEO OUT
Pin No. Assignment
12 No connection
Pin No. Assignment
2 Audio R IN
3 Audio L OUT
4 GND (audio)
5 GND (video)
6 Audio L IN
1 7 B OUT
8 Status
9 GND (video)
10 No connection
11 G OUT

Recording mode

The recording mode allows you to make
surround-compatible analog recordings from
the LINE OUT jacks.
sources are downmixed to stereo for improved
playback with systems that can provide matrix-
decoding (like Dolby Pro Logic).
1 Press SOUND.
Use / to select a REC MODE, then
2
press ENTER.
Use / to choose MODE ON or MODE
3
OFF and then press ENTER to confirm.
• MODE ON – A surround-compatible
downmix (left-total/right-total, or Lt/Rt) of
Dolby multichannel sources is output,
(suitable for Dolby Surround Pro Logic or
other matrix decoding).
• MODE OFF – A simple stereo downmix
(left-only/right-only, or Lo/Ro) is output
(suitable for playback on a two-channel
stereo system or on headphones).
Pin No. Assignment
13 GND (video)
14 GND (video)
15 R or C OUT
16 BLANK OUT
17 GND (video)
18 GND (video)
19 Video or Y OUT
20 No connection
21 GND (video)
2
Dolby multichannel
10
35
En